Hard and Dry Look
Increases Effect of Other Steroids
Drostanolone Propionate, or Masteron as it’s commonly known, is a popular cutting compound particularly favored by those who compete in bodybuilding contests because its maximum potential is seen in people who are already lean, cut, and are carrying low-fat levels.
Masteron is especially good at helping you burn off the most stubborn final ounces of fat that can be hard to shift with other compounds while helping you get the hardest and dry look possible because this steroid comes without the issue of fluid retention.
Masteron isn’t a compound to throw into a steroid cycle without understanding what its exact purpose and function are, as this is a compound that suits quite a specific goal and most of the time is going to be most ideal for competitive bodybuilders or just those who have the most discipline to undertake the best possible cutting cycle for maximum results.
Masteron is a steroid that’s derived from dihydrotestosterone (DHT) with a slight chemical alteration that gives Masteron a higher anabolic rating than DHT itself.
Drostanolone Propionate (Masteron) Structure
There are two different versions of Masteron:
These are simple the Drostanolone compound with a different ester attached to control the release rate and the half-life of the steroid once it's in the body. The ester itself does not affect at all the activity of Masteron as it becomes attached over time once you’ve administered the steroid, leaving Masteron to take full effect.
Propionate is the most common form of Masteron, with Enanthate being harder to find even though it comes with the benefit of fewer regular injections because of its longer half-life. Both forms are relatively difficult to find as they are no longer manufactured in US pharmaceutical labs, so purchasing needs to be done on the black market and underground and this leaves you open to counterfeits and low-quality products.
The cost of Masteron in both forms has reduced in recent times so once you locate a trusted supplier this can become one of the more affordable steroids to include in your cycles.
Propionate is the more widely used variety and allows Masteron to have a longer half-life and a slower rate of release than if the ester were not attached to the hormone.
The resulting half-life is about 2.5 days, which is much shorter than the enanthate variety. Propionate is the most popular variant of Masteron. Being a shorter ester, this version of Masteron is mostly used in shorter cycles than what you would use the enanthate variant for.
Normally the cycle length is 8 to 10 weeks and it should be combined at least with a testosterone steroid (ideally Testosterone Propionate for compatibility), while it also delivers excellent results when used with more powerful steroids like Winstrol or Trenbolone.
The added Enanthate ester gives this version of Masteron a significantly longer half-life of about 10 days.
This version can be harder to come by and has not been as popular with bodybuilders as the propionate type, and only relatively recently has it become more widely used among performance athletes. Due to the long ester and thus long-acting nature of Masteron Enanthate, it’s ideally used in cycles that are longer than you might use Masteron Prop for.
This steroid can easily be used for 12 weeks or more with good results in a cutting cycle stacked at a minimum with testosterone, but it also works well if you want to add another powerhouse cutting steroid to the mix like Winstrol.
One of the most popular cycles is Masteron Enanthate, Testosterone Enanthate, and the powerful anabolic compound Trenbolone Enanthate. Since they all use the same ester these compounds are very compatible with each other and produce superb results for competitive bodybuilders, especially in a pre-contest cycle.
Getting the best possible results from Masteron will not only depend on how good your training and diet are while you’re using the steroid, and what other compounds you might stack it with, but just as important as your dosage and cycle length. With a bit of planning, you can create the perfect cycle for your experience level and your personal goals.
For the vast majority of users, the dosage of Masteron will be kept at a low level. This is not a mass-building steroid and increasing the dose in an attempt to gain muscle will be futile, with other compounds being much more suitable for that purpose. For physique enhancement, Masteron does not need to be taken any higher than 400mg per week.
Beginners are unlikely to want to go any lower than a 200mg weekly dose of Masteron for physique enhancement so this is considered a good starting point if it's your first time using this compound. Unlike most other steroids though, increasing up to or near the maximum recommended dosage for any experience level is possible and even encouraged for beginners with Masteron. That means beginners can confidently use 400mg weekly as it is at that level where Masteron’s hardening and other physique enhancing effects kick in, and this is the case no matter what level user you are making this one of the very few steroids where beginners can confidently use the same amount of the compound as even the most advanced users.
Just as with beginners, intermediate-level users will do very well at the 400mg weekly dose as there are no benefits to going any higher, nor can maximum possible results be yielded with a much lower dose. 400mg is considered the sweet spot of Masteron use in any cycle regardless of what an intermediate user will be stacking it with.
Advanced users generally also stick with a 400mg dose with the full knowledge that Masteron does not and can not act as a primary anabolic steroid in any cycle, with that role going to other compounds which have much stronger anabolic effects.
The timing of your Masteron doses is going to fully depend on which variant you are using. If you’ve been able to obtain the Enanthate variant it’s possible to inject just twice weekly where your weekly dosage will be split into the two injections. If your weekly dosage is set to 400mg, split it to 200mg per injection twice each week.
It can be tempting to take the entire dose in just one injection per week, to cut down on the overall number of injections you need to administer, but you run the risk of blood levels not staying optimized for the entire week. Splitting the dose ensures a stable and optimal level of Masteron throughout your entire cycle.
If Drostanolone Propionate is your selected variety then you will need much more frequent injections because of its shorter elimination half-life where the effects will quickly decline if you are not administering the hormone regularly. This variant of Masteron should ideally be injected every single day of the cycle, although you might be able to get by with one injection every two days. Still, it is not considered ideal. For best results, Propionate should be taken once daily so you are certain your levels are being maintained at the most stable level.
Both the dosage and length of time Masteron is used are critical factors for females when avoiding virilization symptoms. Short-term use of no longer than 6 weeks should be considered the maximum, although as little as 4 weeks can still provide good results and further reduce the risk of masculine side effects occurring.
A dosage of 50mg to no more than 100mg weekly is more than adequate for female steroid users and doses should not exceed this level to minimize virilization effects. It has been well proven through the medical use of Masteron in women that doses higher than this have a very high risk of virilization side effects where the compound would then need to be halted.
Whatever your experience level with anabolic steroids might be, if you’re using Masteron as part of a cutting cycle then almost everyone will want to add a testosterone steroid to the cycle to maintain functional testosterone levels. This means that a Masteron-only cycle for men is never recommended as severe testosterone suppression is almost certain to occur.
This basic beginner cycle makes use of two enanthate steroids in Masteron and Testosterone. By combining the steroids with the same ester, their release rates will be similar and therefore it’s easier and more convenient for the administration timing with both requiring infrequent injections.
The dosage of testosterone used in this cycle will depend if you want to gain some mass and additional strength or just want to use it as a testosterone maintenance compound. Higher doses of testosterone can put you at higher risk of aromatizing induced side effects like gyno which Masteron’s natural aromatase inhibiting activity might not be strong enough to combat, requiring the use of an external aromatase inhibitor drug. Low-level testosterone doses of 100mg to 200mg per week are unlikely to present this problem.
For best results, combine testosterone at your chosen dose with 400mg of Masteron weekly, split into two doses per week where both steroids can be combined and administered together. This 12-week beginner cycle allows new users to evaluate the effects and results of Masteron without interference from or interaction with other more powerful steroids.
Users who are already aware of what Masteron can do are ready to combine it with other powerful compounds for additional cutting and physique enhancement benefits. The Anavar in this cycle is a common addition with its excellent fat burning and physique sculpting ability. In this cycle, testosterone is used only for support and not as an anabolic agent. 100mg weekly of testosterone will provide sufficient support during this cycle.
Anavar is an oral steroid that is excellent for enhancing the metabolic rate and lipolysis. Adding an oral steroid to this cycle raises the question of potential liver stress, however, Anavar at lower doses is not considered such a high risk in this regard. This 10-week cycle makes use of the propionate variant of Masteron at 400mg weekly and Anavar at up to 70mg daily, but 50mg is often enough for great results.
Advanced users will be aiming for maximum possible physique hardening with some moderate mass gains through the use of an additional compound in the cycle that has higher anabolic properties and this can come in the form of Trenbolone Acetate.
Adding a testosterone ester to the cycle at a maintenance dose will also prove of great benefit. 100mg weekly of Testosterone Propionate will cover your needs in this area. This cycle provides more scope for bulking with Trenbolone which when combined with Masteron provides some serious physique changing opportunities when your training and nutrition are in line with these goals.
This is one of the most potent pre-contest combinations that will harden the physique with two compounds that do not aromatize, however, keep in mind that Trenbolone can bind with a high affinity to the progesterone receptor which may result in some gyno, so keeping anti-estrogen drugs on hand is ideal during this cycle. For best results in this 10-week cycle take Testosterone Propionate at 100mg weekly, Masteron Propionate at 400mg weekly, and Trenbolone Acetate at 400mg weekly.
Masteron stacks well with a range of other steroid compounds. At minimum testosterone should always be used in a Masteron cycle to retain your testosterone functionality while Masteron suppresses or even shuts down natural testosterone production. In a cutting cycle, users will benefit enormously by stacking Masteron with other powerful cutting compounds like Anavar or Winstrol which are also derived from DHT.
Masteron is an excellent inclusion in a cutting cycle so the results you can expect relate strongly to physique enhancement and overall fat loss. The lack of aromatization is what makes Masteron such a powerful cutting compound as you will not suffer the bloating effects of water retention.
Not only that, but the anti-estrogen activity of Masteron can also help remove any existing subcutaneous fluid retention which will greatly contribute to physique hardening effect, ultimately giving you that sought-after chiseled and dry appearance.
It’s important to know that these effects are only achievable at the maximum level if you’ve already achieved an exceptionally low body fat ratio where Masteron is then used for the final most extreme physique enhancement; often before a contest.
Thanks to its lack of aromatizing activity, Masteron doesn’t come with some of the side effects that steroid users most often dread of an estrogenic nature. That means water retention and gynecomastia won’t rear their head when you use Masteron (but if you stack it with other steroids that do aromatize then those side effects will still have to be dealt with). This is important for cutting and means that the bloated look that can ruin your physique isn’t going to be an issue with Masteron.
But there are other side effects you need to know about before deciding to use Masteron. Thankfully it’s a fairly mild steroid when it comes to negative effects, at least when compared with more powerful steroids, but some important possible adverse effects will be familiar to you if you’ve ever used other steroids. These include:
If you have hair loss or baldness in your genes then the androgenic activity of Masteron can bring forward this problem much earlier than it would have happened to you. Not all men will experience hair loss some will have zero issues in this regard as this is one of the few side effects that mostly comes down to genetics. Similarly is the issue of acne and increased oiliness of the skin; again, this is more likely in guys who had experienced serious acne as a teen.
Perhaps the most serious possible side effect from Masteron concerns cholesterol and the way this steroid can both cause a rise in the bad type of cholesterol (LDL) while simultaneously decreasing levels of the good type of cholesterol (HDL).
The potential for negative cholesterol impacts is great enough with Masteron that anyone with existing high cholesterol is advised not to use this steroid at all. For everyone else, closely monitoring your cholesterol levels during the cycle is essential, as is sticking with a quality cholesterol-friendly diet.
Since Masteron is mainly used during cutting cycles, it is unlikely that your diet will contain foods that put cholesterol at risk, however, it’s not only what you aren’t consuming that matters but what you are – so eating omega-3 fatty acid-rich foods and other cholesterol friendly items like avocado, nuts and garlic are also important. Cardio work at the gym as part of your cutting cycle will also contribute to maintaining healthy cholesterol during a Masteron cycle.
This is a steroid that will suppress your natural testosterone production quite significantly. For this reason, you must include a testosterone steroid in your cycle to avoid falling into a low testosterone state.
Only a low dose of testosterone is required to fill this role during your Masteron cycle, as you are not using that steroid for any purpose other than as a testosterone replacement.
Even though testosterone production will start up again following the end of a cycle, this is a long and slow process and one that you don’t want to wait for – this is where a good PCT plan is critical so you can get your testosterone production kickstarted much faster and you avoid that low testosterone state where you’ll lose muscle, gain fat, lack mental and physical energy, lose your libido and more.
Being based on DHT which is significantly more androgenic than testosterone itself, Masteron poses relatively high risks of virilization for female users, and for this reason, it’s not a steroid that is ideal for use by most women unless used at low doses and development of side effects closely monitored, and use of Masteron stopped if effects like a deepened voice and body hair growth begin taking effect.
Post-cycle therapy is required following your Masteron cycle so your natural testosterone production can be stimulated and testosterone levels normalized as soon as possible after the suppression of the hormone caused by the use of this steroid. Your exact PCT protocol is going to depend a lot on what other steroids you’ve used in your cycle and how suppressive they are.
The timing of the start of your post-cycle therapy will also be determined not just by these other compounds in the cycle, but also by which variant of Masteron you’ve used and its respective half-life.
In any case, you will most likely turn to the tried and tested PCT drugs in Nolvadex and Clomid which both help stimulate testosterone production. If you’ve taken some stronger steroids alongside Masteron then it's worth considering the use of HCG in PCT and this can be started the day after your last Masteron injection for a two-week period at a dose of 2500iu weekly which should be split into two doses each week.
HCG itself can cause side effects like gyno so it should be taken with an aromatase inhibitor to prevent this.
Masteron was originally developed to treat breast cancer in women because of its anti-estrogen properties. These days it has been mostly replaced for medical use by newer drugs but remains popular with bodybuilders and physique athletes for its physique enhancing properties that are especially ideal for pre-contest preparation in a cutting cycle where you have very low body fat already and want to trim down even more with a much harder dryer look.
Masteron’s benefits are some of the most specific you will find among any anabolic steroid. People who want to use Masteron will already have a target goal in mind and for most of us that will be to get as trimmed, toned, and ripped as possible and for contest preparation where fat needs to be at a minimum and the physique must be as hard and dry as possible. Masteron comes without water retention so provides a powerful addition to a cutting cycle where not only fat loss is desired, but an overall physique enhancement suits the most serious of users.
Like any other injectable steroid, Masteron is used as an intramuscular injection to inject the solution deep into the muscle tissue where it then enters the bloodstream. The larger, stronger muscles are chosen to avoid nerve damage in smaller muscles. The injection site should be rotated regularly to avoid irritation or injury. Buttocks, thigh, and deltoid (upper arm/shoulder) muscles are the most common sites chosen for injecting Masteron and other anabolic steroids.
Yes, not only can you stack Masteron with almost any other steroid, but it’s of great benefit to doing that. Masteron’s beneficial properties not only contribute to your results directly but also assist in the effectiveness of the way other steroids work in the body thanks to its anti-estrogen activity plus its ability to help prevent the binding of SHBG, a process that can have a detrimental impact on the function of some steroids.
Females can use Masteron but must be aware of the high risk of virilization side effects. The only method for females to use Masteron is at low doses and for short cycles of no longer than 6 weeks, but even then there is a risk of side effects like body hair growth and voice deepening – if these start occurring then women are advised to either reduce the dosage further or stop the use of Masteron completely and these side effects will disappear.
Yes, just about all anabolic steroids require a post-cycle therapy period afterward and Masteron is no exception because it will suppress your testosterone greatly during the cycle. Most people will make use of other steroids combined with Masteron which also come with their testosterone suppressing effects – sometimes resulting in a complete shutdown of natural testosterone production. PCT making use of drugs like Clomid and Nolvadex as well as hCG is always advised following a Masteron cycle.
Masteron is an anabolic androgenic steroid, so it has both anabolic and androgenic properties. Both its anabolic and androgenic ratings are quite low but it has a strong binding affinity to the androgen receptor which helps with fat loss and with the hardening of muscles – two of the main reasons people choose to use this steroid.